Sandpiper S20 Non-Metallic User Manual download pdf (Page 12)

520-202-000 9/03 Model S20 Non-Metallic Design Level 2 Page 10

MATERIAL CODES

The Last 3 Digits of Part Number

000 ........Assembly, sub-assembly; and some purchased

items

010 ........Cast Iron

012 .........Powered Metal

015 .........Ductile Iron

020 ......... Ferritic Malleable Iron

025 ........ Music Wire

080 ........Carbon Steel, AISI B-1112

100 ........Alloy 20

110 ........Alloy Type 316 Stainless Steel

111 ........Alloy Type 316 Stainless Steel (Electro Polished)

112 ........Alloy “C” (Hastelloy equivalent)

113 .........Alloy Type 316 Stainless Steel (Hand Polished)

114 .........303 Stainless Steel

115 .........302/304 Stainless Steel

117 .........440-C Stainless Steel (Martensitic)

120 .........416 Stainless Steel (Wrought Martensitic)

123 .........410 Stainless Steel (Wrought Martensitic)

148 ........Hardcoat Anodized Aluminum

149 ........2024-T4 Aluminum

150 ........6061-T6 Aluminum

151 ........6063-T6 Aluminum

152 ........2024-T4 Aluminum (2023-T351)

154 ........Almag 35 Aluminum

155 ........356-T6 Aluminum

156 ........356-T6 Aluminum

157 ........ Die Cast Aluminum Alloy #380

158 ........Aluminum Alloy SR-319

159 .........Anodized Aluminum

162 .........Brass, Yellow, Screw Machine Stock

165 ........Cast Bronze, 85-5-5-5

166 ........Bronze, SAE 660

170 ........Bronze, Bearing Type, Oil Impregnated

175 ........Die Cast Zinc

180 ........Copper Alloy

305 ........Carbon Steel, Gray Epoxy Coated

306 .........Carbon Steel, Black PTFE Coated

307 ........Aluminum, Gray Epoxy Coated

308 .........Stainless Steel, Black PTFE Coated

309 .........Aluminum, Black PTFE Coated

310 .........Kynar Coated

330 .........Zinc Plated Steel

331 ........Chrome Plated Steel

332 ........Aluminum, Electroless Nickel Plated

333 ........Carbon Steel, Electroless Nickel Plated

335 ........Galvanized Steel

336 ........Zinc Plated Yellow Brass

337 ........Silver Plated Steel

340 ........Nickel Plated

342 ........Filled Nylon

353 .........Geolast; Color: Black

354 ........Injection Molded #203-40 Santoprene - Duro 40D

+/-5; Color: RED

355 ........Thermal Plastic

356 ........Hytrel

357 ........Injection Molded Polyurethane

358 ........Rupplon (Urethane Rubber). Color coded:

PURPLE (Some Applications) (Compression Mold)

359 ........Urethane Rubber

360 ........Buna-N Rubber. Color coded: RED

361 ........Buna-N

363 ........Viton (Flurorel). Color coded: YELLOW

364 ........E.P.D.M. Rubber. Color coded: BLUE

365 ........Neoprene Rubber. Color coded: GREEN

366 ........Food Grade Nitrile

368 ........Food Grade EPDM

370 ........ Butyl Rubber. Color coded: BROWN

371 ........Philthane (Tuftane)

374 ......... Carboxylated Nytrile

375 ........Fluorinated Nitrile

378 ........High Density Polypropylene

405 ........Cellulose Fibre

408 ........Cork and Neoprene

425 ........Compressed Fibre

426 ........Blue Gard

440 ........Vegetable Fibre

465 ........Fibre

500 ........Delrin 500

501 ........Delrin 570

502 ........Conductive Acetal, ESD-800

503 ........Conductive Acetal, Glass-Filled

505 ........Acrylic Resin Plastic

506 ........Delrin 150

520 ........Injection Molded PVDF Natural color

540 ........Nylon

541 ........Nylon

542 ........Nylon

544 ........Nylon Injection Molded

550 ........Polyethylene

551 .........Glass Filled Polypropylene

552 .........Unfilled Polypropylene

553 .........Unfilled Polypropylene

555 ......... Polyvinyl Chloride

556 ......... Black Vinyl

570 .........Rulon II

580 .........Ryton

590 .........Valox

591 ......... Nylatron G-S

592 ........Nylatron NSB

600 ......... Virgin PTFE

601 ......... PTFE (Bronze and moly filled)

602 ......... Filled PTFE

603 ........Blue Gylon

604 ......... Virgin PTFE

607 ........Envelon

606 .........Injected molded PFA

610 ......... Encapsulated Silicon

611 ......... Encapsulated Viton

632 .........Neoprene/Hytrel

633 .........Viton/PTFE

634 .........EPDM/PTFE

637 .........PTFE, Viton

638 ......... PTFE, Hytrel

639 .........Buna-N

643 .........Santoprene

/EPDM

644 .........Santoprene

Delrin, Viton and Hytrel are registered tradenames of

E.I. DuPont.

Gylon is a registered tradename of Garlock, Inc.

Nylatron is a registered tradename of Polymer Corp.

Santoprene is a registered tradename of Monsanto Corp.

Rulon II is a registered tradename of Dixion Industries Corp.

Hastelloy-C is a registered tradename of Cabot Corp.

Ryton is a registered tradename of Phillips Chemical Co.

Valox is a registered tradename of General Electric Co.

Warren Rupp, Rupplon, SANDPIPER, PortaPump, Tranquilizer,

RuppGUARD™, RuppTech® and SludgeMaster are registered

tradenames of Warren Rupp, Inc.

This pump is pressurized

internally with air pressure

during operation. Always

make certain that all bolting

is in good condition and that

all of the correct bolting is reinstalled during

assembly.

WARNING

Before pump operation,

inspect all gasketed

fasteners for looseness

caused by gasket creep.

Re-torque loose fasteners

to prevent leakage. Follow recommended

torques stated in this manual.

CAUTION

When used for toxic or

aggressive fluids, the pump

should always be flushed

clean prior to disassembly.

WARNING

Before maintenance or

repair, shut off the com-

pressed air line, bleed the

pressure, and disconnect

the air line from the pump.

The discharge line may be pressurized and

must be bled of its pressure.

WARNING

IMPORTANT

Read these safety warnings

and instructions in this

manual completely, before

installation and start-up

of the pump. It is the

responsibility of the purchaser to retain this

manual for reference. Failure to comply with

the recommendations stated in this manual will

damage the pump, and void factory warranty.

WARNING

Airborne particles and loud

noise hazards.

Wear ear and eye protection.

WARNING

In the event of diaphragm

rupture, pumped material

may enter the air end of the

pump, and be discharged

into the atmosphere. If

pumping a product which is hazardous or toxic,

the air exhaust must be piped to an appropriate

area for safe disposition.

IMPORTANT SAFETY

INFORMATION

Before doing any main-

tenance on the pump, be

certain all pressure is

completely vented from the

pump, suction, discharge,

piping, and all other openings and connections.

Be certain the air supply is locked out or made

non-operational, so that it cannot be started while

work is being done on the pump. Be certain that

approved eye protection and protective clothing

are worn all times in the vicinity of the pump.

Failure to follow these recommendations may

result in serious injury or death.

WARNING

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments

Sandpiper S20 Non-Metallic User Manual Page 12

Comments to this Manuals

Related products and manuals for Pumps Sandpiper S20 Non-Metallic